Search for answers or browse our knowledge base.
ECOSYS MA2001w
DISCONTINUED
A4 mono MFP.
Prints have dots, streaks or spots
If print quality is reduced, we recommend the following cleaning steps:
Please switch off the device first using the main switch.
Corona wire cleaning:
- To do this, first remove the toner cartridge by pressing the blue button and then the drum unit behind it by pulling on the blue handles (D).
The gray cleaning slider is located on the left side of the drum unit. - First, fold up the gray cover and slide the cleaning slider back and forth across the entire width at least 10 times.
- Then make sure that the cleaning slider is firmly locked into its leftmost position before reinserting the units into the device in reverse order.
Pale prints
If print quality is reduced, we recommend the following cleaning steps:
Corona wire cleaning:
- To do this, first remove the toner cartridge by pressing the blue button and then the drum unit behind it by pulling on the blue handles (D).
The gray cleaning slider is located on the left side of the drum unit. - First, fold up the gray cover and slide the cleaning slider back and forth across the entire width at least 10 times.
- Then make sure that the cleaning slider is firmly locked into its leftmost position before reinserting the units into the device in reverse order.
Clear paper jams
The Paper Jam message appears when paper is jammed in the paper transport system or no paper is fed in at all.
The device automatically switches to offline mode and the Warning indicator lights up . The KYOCERA Client Tool can indicate the location of the paper jam.
Remove the paper jam. After the jammed paper is removed, the printer starts printing again.
WLAN connection to MAC OSX
Requirements:
A WLAN-enabled printer or multifunction device, i.e. one with the (w) in the name.
To connect the device to a MAC OSX system via WLAN, the device must first be available in the WLAN.
The best way to do this is to use the WPS method. To do this, you should follow the steps that your router instructs you to do. All you have to do is press the WLAN button on the device.
If you do not have this option, you can set up the device using the client tool. However, you will need a Windows PC to do this as the client tool is only available as a Windows application.
It is important that you then note down the assigned IP address of the device.
Setup on MAC OSX:
Download the latest driver from our website in the Downloads section .
Select your device under “ Choose an option ” and install the driver on your MAC as usual.
Next, go to “ System Preferences” on your MAC, then to “Printers & Scanners” and
in the window that opens, click on the “+” symbol at the bottom left. In this
window, click on the middle symbol (the globe) at the top.
Under “ Address ” enter the determined IP address of the device. Please set
the “ Protocol” to “Line Print Daemon — LPD” . You can now choose the
name freely. Under
“ Use ” the currently installed driver should now be listed.
Finally, click “ Add”. The device
is now set up and ready to use.
Scanning
If the problem persists, please provide us with a detailed description of the error. In order to resolve your issue as quickly as possible, please also provide us with the following information:
Status page :
System menu/counter
– list print – print
report –
status page –
press and confirm with YES on the display
Service status page :
– System menu/counter
– Settings –
Maintenance –
Service settings –
Service status –
Press OK and confirm with YES on the display
General information and notes:
Checking the device serial number:
The serial number of the device can be found in the following location, as shown in the figure.
Original Toner
To ensure long-lasting quality, we recommend using only original Kyocera toner containers, as these have to pass numerous quality tests.
If non-original toner is used, this can lead to malfunctions.
We accept no liability for damage caused by using consumables from other suppliers.
Our replacement toner containers are provided with a special sticker as shown below and are therefore recognizable as original consumables.
Request KYOCERA support
To request Kyocera support, please click on the button below to access our service centre.